One of the most important factors to consider when buying a steel file cabinet is its thickness, which is crucial for both large and small brands.Especially for the quality of the product, it can be said that a large part is determined by the thickness.Then, what is the thickness of steel file cabinet to ensure the quality of use?The following file cabinet manufacturer of Huadu gives us a comprehensive understanding of this section:
When it comes to the thickness of file cabinets, there is no avoiding the quality of the steel plates.Even if the thick, if the quality of the raw material itself is not good, then it is useless.Therefore, when we buy the steel file cabinet, we should ask whether the raw materials used by the manufacturer are produced by the large manufacturer.After all, the quality of steel produced by large steel mills is more guaranteed, so as raw materials for iron cabinets produced by the product quality is better.
For different manufacturers, due to different production strength, different profit cost and other reasons, there will be some deviations in the selection of steel plate thickness, and these deviations determine the product quality of the steel sheet filing cabinet.For example, some manufacturers use 0.6mm bare board, others use 0.4mm thick bare board, and even some manufacturers use 0.3mm thick bare board.
If we want to buy a product with good quality, we must choose a product with a thickness of at least 0.6mm when we choose it. In this way, the thickness will basically reach 0.8mm after the application process of the file cabinet manufacturer.Only in this way can the product have enough carrying weight, and will not appear in the process of using damage.
In any case, we must buy the steel file cabinet for the purpose of buying more suitable products. Therefore, we should consider the thickness of the steel file cabinet and the production process of the manufacturer, so as to make sure everything is safe.
