When we are buying tin file cabinet, an important factor that cannot ignore is its thickness, no matter be the manufacturer that chooses big brand or small manufacturer, thickness is a crucial factor.Especially for the quality of products, it can be said that a large part of the thickness of the decision.So, what is the thickness of the steel sheet cabinet to ensure the quality of use?
When it comes to the thickness of filing cabinets, it's inevitable that the quality of the steel plates is what matters.Even if again thick, if itself raw material quality is not good, then also useless.Therefore, when we buy a tin filing cabinet, we should ask whether the raw materials used by the manufacturer are those produced by a large manufacturer.After all the steel plate quality that large steel mill place produces has assurance more, the product quality that produces when the raw material that USES as iron leather ark so also is better.
For different manufacturers, due to different production capacity, different profit costs and other reasons, there will be some deviations in the selection of steel plate thickness, and these deviations determine the product quality of the tin filing cabinet.For example, some manufacturers use the 0.6mm bare board, some manufacturers use the 0.4mm thickness of the bare board, and even some manufacturers use the 0.3mm thickness of the bare board.
And if we want to buy products with good quality, we must choose products with a thickness of at least 0.6mm when we choose them. In this way, the thickness basically reaches 0.8mm after being sprayed by the filing cabinet manufacturer.Only in this way can we ensure that the product has enough bearing weight and will not be damaged in the process of use.
In any case, we buy the tin filing cabinet is sure to want to buy more suitable for our products, so we have to consider the thickness of the iron sheet and the production process of the manufacturers these problems, so as to be absolutely safe