New hand push mobile compactor is the intelligent integration of the modern corporation and enterprise file cabinet management butler, hand push mobile compactor structure from ark box, the fuselage, the structure of the cross rail transport, protection device of the four most, dense frame body by column, bone, baffle, hook, roof and other components, and hand push mobile compactor for removable assembly structure according to the site environment required to use.
The hand push mobile compactor is a three - dimensional space and USES a combination of columns.The shelf and hook can adjust the vertical height of the column, and the spacing of column holes is 50 mm.The main body of the frame is designed with a buffer seal.It is made of permanent magnet anti-aging plastic.It is tightly bound and will not deform or fall off.After the cabinet body is closed, the side seal is good.
The width of the side plate and seal strip is greater than the width of the chassis.After the frame is closed, the clearance between the cases is about 25mm.So cabinet body is provided prevent rat board, make the clearance between chassis is in after closing less than 2 millimeter, make dust and mouse cannot enter.The top of the manual compact rack is provided with a dustproof panel to prevent dust from entering the data inside the compact rack.The waterproof device can also be designed according to customer requirements to prevent data damage when the sprinkler device is accidentally opened.
Hand push mobile compactor is also equipped with locking device.When workers enter the frame, the locking device twists to the locking position, and other personnel cannot shake the frame to ensure the safety of personnel in the frame.The anti-backlining device has an anti-barb fixed under the chassis and prevents the barb from sliding with the track during normal operation.When the dense frame body is subjected to tilt force, the force is transferred to the track through the antibarbs on the chassis and to the ground through the expansion screws that connect the guide rail to the ground to ensure that the frame is not tilted.Each set of manual shelves is fitted with a lock that is closed and locked to form a closed whole.
