The iron sheet thickness of steel locker is very important for quality, this is not only because the iron sheet is the main raw material of steel locker, but also the main part of bearing.If the iron sheet thickness is very thin, so it is easy to cause this kind of locker load-bearing inadequacy, so about the steel locker thickness of these knowledge, you want to understand.
Generally speaking, the thickness of steel locker is not simply the cabinet thickness after the finished product, we should also consider the thickness of its raw materials, that is, bare board thickness and spray thickness.Bare plate thickness is the base thickness of the iron sheet, without any treatment, coating thickness is the final thickness of the iron sheet after the powder spraying process.Now on the market high quality bare board thickness should be about 0.6mm, and spray thickness should be about 0.8mm.
Say so, face this kind of circumstance, when we are buying steel to change wardrobe, want to understand what manufacturer says before communicating with manufacturer is which kind of ply, ability achieves know in the head so.If the manufacturer regards spraying thickness as bare board thickness, and we did not pay attention to go to see again, so wait until after buying back can oneself eat dumb loss only, this also is now a lot of undesirable manufacturer customary means.
When we need to measure the thickness of steel locker, the best method is to use a higher precision caliper to measure, so that the data obtained is more accurate.Some consumers like to measure thickness by eye observation, this method error is very large, so it is not recommended to use this way.
As users, we should also pay attention to the steel locker thickness, thickness is only one aspect of quality, in addition to the thickness of some other aspects we also have to consider.
